Wood rot repair
Rotted sills, trim, fascia and siding edges rebuilt to match the profile.
Services
Fast Guys Remodeling does carpentry for homes in Blue Springs and the eastern Kansas City metro, inside and out. We repair or build trim, baseboards, casing, doors, framing and custom wood details that improve how a home looks and works. We measure carefully, use quality fasteners and keep cuts clean so everything fits.
Tell us what you want installed or repaired. A few photos and measurements help.
Get a quote

Interior trim is what makes a room look finished. Work such as this is typical:
If your project is not on this list, ask us. Some jobs are a good fit and others are better done by a specialist.

Outside, carpentry protects the house.
We repair or build exterior trim, doors and framing details. The most common jobs are door and window trim, fascia and soffit repairs and porch details. Where wood has rotted, the damaged material is removed and replaced so the profile matches. See wood rot repair for how that works.
Framing is part of our carpentry scope, for example where a wall, opening or support needs to be repaired or built. Larger structural questions need a closer look first.
Fit is the difference between trim that looks built-in and trim with gaps. The usual order is:
We measure the room, the walls and the openings, and check for walls that are out of square.
Material is chosen and cut to length. Primed or raw trim is picked to suit the paint plan.
Joints are cut clean and test-fitted before anything is fastened.
Quality fasteners hold trim to framing, not just to drywall.
Seams and nail holes are filled so the paint line is sharp.
Trim is primed and painted. If you are painting too, see interior painting. If drywall behind the trim needs repair, see drywall repair.
Ready for step 1? Tell us the room and your city.
The unit a quote is built on matters as much as the total.
Carpentry is quoted in different ways, and the unit matters when you compare:
| Pricing basis | Used for | What to check |
|---|---|---|
| Per linear foot | Baseboard, casing, crown | The total feet in your rooms, and whether paint is included |
| Per piece or opening | Doors, windows, single repairs | Whether hardware, trim and finishing are included |
| Per room or project | Closets, built-ins, small remodels | The drawings or sketch the quote is based on |
| Time and materials | Repairs with unknowns | How hidden problems are handled before work starts |
These factors also move the price: material (primed pine, MDF or hardwood), profile complexity, wall condition, house age and whether the job includes painting.
Send photos, rough measurements and a list of the rooms. We will explain what the job involves.
For more on how quotes are built, read what carpentry work costs in Kansas City.
Trim, framing and doors are part of nearly every remodel.
In a kitchen they show up as framing for openings, trim around windows and doors, and details that make cabinets and walls meet cleanly. In a bathroom they are door casings, baseboards and any framing needed for a new layout. See kitchen remodeling and bathroom remodeling for the full process.
If you are hiring a carpenter separately, our guide on how to hire a finish carpenter lists what to ask.
Ready to talk it through? Tell us about your project.
Older Kansas City homes often have trim profiles that are hard to find today.
A new piece may need to be milled or combined from standard profiles to match, or it may be easier to replace a whole run. If you have a profile you want to keep, tell us on the call and send a photo of the trim in cross-section or an end cut.



See more carpentry photos.
Fast Guys Remodeling works in Blue Springs, Grain Valley, Lee's Summit, Independence and across the Kansas City metro. See all service areas.
Carpentry in Blue Springs? See our Blue Springs remodeling page.
Cost and value
Price depends on the trim profile and material, the linear feet, the number of corners and doors, whether old trim must be removed and whether painting is included. Crown molding and wide, tall profiles take more time than simple baseboard. Wavy walls or out-of-square corners add labor. Ask for a quote that lists the length, material, paint and what happens to old trim.
Next step: Carpentry cost and price drivers
Process and scope
Baseboard runs along the bottom of walls, casing frames doors and windows, and crown molding sits where the wall meets the ceiling. Shoe or quarter-round covers the gap between baseboard and floor. Each has its own profile and installation details, and matching them gives a room a consistent look.
Next step: Carpentry services
The model residential code puts the top of a handrail 34 to 38 inches above the line along the stair nosings, and guards at open sides of stairs, porches and landings at least 36 inches high. Spacing between balusters is also limited. Your city adopts a specific edition, so confirm before you build or replace a rail. We can talk through a stair or rail project if you describe it.
Next step: Carpentry stairs and railings
Yes, we can. New trim is usually caulked, nail holes are filled and the trim is primed and painted so it looks finished. Painting before installation and touching up afterward is sometimes used. Tell us whether you want the trim painted and we will plan the order of work.
Next step: Interior painting services
Yes. Rotted sections are cut out and replaced, and the profile is rebuilt to match. The most important part is fixing the moisture source, such as a gutter, flashing or caulk failure, or the rot returns. Large or structural rot is a separate job. See our wood rot page for how that works.
Next step: Wood rot repair services
Framing is part of what we do for remodels. Structural changes, such as moving a bearing wall or replacing a beam, typically need a structural review and a permit, so we start by finding out what the wall carries. Tell us what you want to change and we will tell you what we would check first.
Next step: Carpentry framing
Often. Trim can be matched from a sample by using a stock profile that is close, combining two stock pieces, or milling a custom profile. Custom milling costs more and takes longer. Remove a small piece from a hidden spot to bring when you call. Older homes may need work to flatten walls first.
Next step: Carpentry process and timeline
Decide between a prehung unit, which comes with its own frame and is easier to square, and a slab door, which reuses the existing frame. Measure the rough opening, the swing and the wall thickness. Older houses are often out of square, so doors may need shimming, planing and trim adjustments. New hardware and paint finish the job.
Next step: Carpentry doors
Primed MDF is smooth, economical and common for interior painted trim, but it swells if soaked. Solid wood takes stain and repairs well. PVC or composite trim is popular outdoors and in wet areas because it does not rot, though it moves with temperature and needs the right adhesive and fasteners. Pick by location: dry interior, damp interior or exterior.
Next step: Carpentry materials explained
In a remodel the usual order is drywall, primer, flooring, trim installation, caulk, then final paint; some painters paint trim before it goes up and touch up after. Baseboard is typically installed after finished flooring and shoe molding covers the gap. Ask your contractor to confirm the sequence so nothing gets scratched.
Next step: How the work is sequenced (carpentry)
Permits and rules
It depends on height, attachment and city. Blue Springs lists low decks, no more than 30 inches above ground with no overhead structure or space beneath, as exempt; Lee's Summit requires permits for decks more than 30 inches above grade; Grain Valley requires them for decks over 30 inches or attached at any height. Confirm with your city before building.
Next step: Cities we serve
No question matches that search. Call (816) 267-1660 or request a quote and ask us directly.
Still have a question? Call or request a quote.
Describe the damage or the rooms. Photos help when you call or write.
Share the room, your city and what you want changed. We will call you back at the number you gave.