Wood rot repair
Rotted sills, trim, fascia and siding edges rebuilt to match the profile.
Services
Fast Guys Remodeling handles exterior painting for homes in Blue Springs and the eastern Kansas City metro. Good exterior paint starts with the surface: we scrape loose paint, sand edges, power wash when needed, prime bare or repaired areas and caulk gaps so the finish seals correctly. We also take care of small wood repairs before paint goes on.
Call or send a few photos of the house and tell us which sides, trim and doors you want painted.
Get a quote

Exterior paint rarely fails because of the paint alone. In Kansas City it usually fails for these reasons:
A good job deals with these causes first and paints second. That is why the process below starts with washing and repair.

Here is the order of work on a typical exterior job.
We look at siding, trim, doors, soffit and fascia for peeling, cracks, soft spots and gaps.
Dirt, mildew and chalky residue come off first, or the new paint will not bond. See power washing below.
Loose paint comes off and edges are feathered so the new coat does not show ridges.
Small wood repairs are done now. Rotted trim, sills and fascia need more than paint. See wood rot repair.
Gaps at trim, corners and around windows and doors are sealed so water stays out.
Bare wood and repaired areas get primer so the color coats cure evenly.
Two coats of exterior paint are typical.
We check the finished house with you and clean up.
Weather sets the schedule. Paint and primer need dry surfaces and the right temperature, so a rainy week moves the work.
Ready for step 1? Tell us the room and your city.
Power washing is how a surface gets clean enough for new paint or stain to bond.
Power washing removes dirt, mildew, algae and surface buildup from siding, brick, concrete, patios, driveways, porches and decks. Done before painting or staining, it makes a big difference to how well the new finish bonds.
Two methods are common. Pressure washing uses higher water pressure and suits hard surfaces such as concrete and brick. Soft washing uses lower pressure with a cleaning solution and suits siding and other surfaces that high pressure can damage. Which one is right depends on the material and its condition.
We power wash when needed as part of exterior painting and staining prep.


This is general guidance, not a promise for any specific week.
In the Kansas City area, the typical good windows are late April to early June and mid-September to mid-October. Paint and primer generally need air and surface temperatures in roughly the 50 to 85 degree F range, low humidity and a dry forecast for the coming day or two. Read the paint can for the exact limits.
Spring storms, midsummer heat and early freezes narrow the window. Booking early in the season, and being ready to move a day when the weather turns, keeps the job on track. Our exterior prep guide covers timing and prep in more detail.
Ready to talk it through? Tell us about your project.
Exterior painting usually covers siding, trim, fascia, soffits, doors, porch posts and other wood details.
Condition matters more than surface type: sound wood takes paint well, soft wood needs repair first. Tell us what your house is clad in, such as wood, fiber cement, vinyl or brick, and we will say what is practical to paint.
Related carpentry, such as replacing trim boards, is covered under carpentry and trim.
Exterior quotes vary because houses vary. These are the factors that move the price most:
| Factor | Why it matters |
|---|---|
| House size and stories | More surface and taller work means more time and equipment. |
| Condition of the surface | Peeling paint, mildew and soft wood need scraping, washing and repair first. |
| Wood repair | Rotted trim and fascia are repaired or replaced before paint. |
| Siding and trim detail | Lots of trim, shutters and small panes take more hand work than flat siding. |
| Number of colors and coats | Color changes and bare surfaces usually need primer and extra coats. |
| Access | Steep grades, tight gaps and tall walls add setup. |
When you compare quotes, check that each one says what is scraped, what is repaired and how many coats are applied.
Send photos of each side of the house. We will explain what the job involves and what moves the price.
Homes built before 1978 may have lead-based paint on the exterior.
Federal rules require lead-safe work practices for paid renovation in most pre-1978 homes. Ask any contractor for their EPA lead-safe certification before scraping or sanding begins.
Source: U.S. EPA, Lead Renovation, Repair and Painting Program.
If your neighborhood has a homeowners association, check its color and material rules before you pick a color. Painting a house the same color usually does not need a city permit. Work that changes structure, such as replacing siding sections with framing changes, may need one.
The City of Blue Springs lists painting and wallpaper among the projects that are exempt from a building permit.
Official source: City of Blue Springs, Do I Need a Permit, checked 2026-11-16. Rules change: confirm with the city before you start.
In other cities: Many remodeling projects need a permit, especially work that changes plumbing, electrical, framing or structure. Rules differ by city, and cosmetic work such as painting is often exempt. Check with the building department before work starts. The permit is pulled by the contractor or by you as the homeowner, so confirm in writing who does it.
Ready to talk it through? Tell us about your project.



See more exterior painting photos.
Fast Guys Remodeling works in Blue Springs, Grain Valley, Lee's Summit, Independence and across the Kansas City metro. See all service areas.
Painting in Blue Springs? See our Blue Springs remodeling page.
Cost and value
It depends on the home's size and number of stories, the siding material, the condition of the existing paint, how much scraping and repair is needed, the number of coats and how many details such as trim, doors, shutters and soffits are included. Rot repair and washing are separate line items on many quotes. Ask for a written scope that lists each area and the prep steps, and compare quotes that way.
Next step: Exterior painting cost and price drivers
For your own home, repainting is generally maintenance, not an improvement. IRS Publication 523 lists painting among repairs that are not added to your home's cost basis, except when it is part of a larger remodeling or restoration job, which can make the whole job an improvement. Rental or business property follows different rules, so check with a tax professional.
Timing
Late spring and early fall are common windows in our climate, when days are dry and temperatures are mild. Paint needs a dry surface and temperatures inside the range printed on the can, so avoid frost, rain and intense midday heat. A mid-summer job needs shade planning and an early start. Book early, since good painting weather is limited and schedules fill.
Next step: Exterior painting process and timeline
Rain, heavy dew, high wind, frost and surfaces that are too hot or too cold. Most exterior paints state a minimum application temperature and a dry-time window before rain or a cold night. A painter should check the forecast, wait for siding to dry and stop early if temperatures drop. A few weather days are normal in any schedule.
A typical house takes several days to a couple of weeks depending on size, prep, repairs and coats, and rain days stretch it. Washing and prep come first, then priming and two coats, with drying time between each. Ask for a start and finish estimate, how weather delays are handled and when the final touch-up happens.
Process and scope
Washing, scraping loose paint, sanding edges, priming bare or repaired wood, caulking gaps and fixing small wood damage. Prep is usually the largest part of a durable paint job. Skipped prep is what makes paint fail early. Ask any painter to list the prep steps in the quote.
Washing is part of prep when the surface needs it, because paint will not bond to dirt, chalk or mildew. Pressure and technique should match the siding, with lower pressure for wood and a longer drying time before paint goes on. We power wash as needed before painting; if you need washing alone, ask us whether it fits.
Next step: Exterior painting power washing
Only if you are ready to maintain it. Paint on brick is hard to reverse, it changes how the wall handles moisture, and it needs periodic repainting. Moisture problems, efflorescence or crumbling mortar should be fixed first, and breathable masonry paint is typically used. If you are unsure, test a small hidden area, and check HOA rules first.
Next step: Exterior painting services
Until the siding is fully dry, which is often a day or two in warm, dry weather and longer in shade, humidity or cold. Painting damp wood or siding traps moisture and leads to blistering and peeling. Do not rush it: a painter should check dryness, not only the calendar, and may use a moisture meter on wood.
Small wood repairs are part of exterior prep: rotted sections are cut out and replaced, and the repair is primed and caulked before paint. Large or structural rot is a separate carpentry job, and the cause of the moisture should be fixed too. Show us the damage and we will say how we would handle it.
Next step: Wood rot repair services
Yes, if the pressure is too high or the nozzle too close. It can gouge wood, force water behind lap siding, strip paint unevenly and damage soft brick mortar. Wood and older paint need lower pressure or a soft-wash approach. Rinse downward rather than up under laps. If you have lead paint or siding in poor shape, ask for advice before washing.
Next step: Power washing and surface prep (exterior painting)
Permits and rules
A city permit is usually not required for painting; Blue Springs, for example, lists painting and similar finish work as exempt. HOAs are different: many covenants regulate exterior colors, and the city says it does not enforce those private agreements. Get approval for the color in writing before you buy paint. Repairs such as siding or structural work may need a permit.
Next step: Cities we serve
Risks and safety
Usual causes are moisture behind the siding or trim, poor surface prep, painting over dirt or loose paint, bad weather during application and old failed coatings. Fix the water source first, whether it is a gutter, flashing or caulk failure, then scrape, sand, prime and repaint. Repainting without fixing moisture or prep brings the peeling back.
Next step: More on wood rot repair
Guides commonly cite roughly five to ten years, and the real number depends on prep, paint quality, sun exposure and siding type. South- and west-facing walls fade and crack sooner than shaded walls. Our freeze-thaw cycles, summer heat and storms are hard on exteriors, and caulking, trim and rot repair done before painting extend the life of the job. Chalking, peeling and bare wood are signs it is time.
Yes. For homes built before 1978, EPA's Renovation, Repair and Painting rule requires paid contractors who disturb painted surfaces to use lead-safe work practices, and EPA recommends hiring a firm with EPA lead-safe certification. Scraping and sanding exteriors can spread chips into the soil and drains, so containment and cleanup matter. Ask for certification before work starts.
Next step: Exterior painting safety and lead rules
No question matches that search. Call (816) 267-1660 or request a quote and ask us directly.
Still have a question? Call or request a quote.
Describe the damage or the rooms. Photos help when you call or write.
Share the room, your city and what you want changed. We will call you back at the number you gave.